AE-26 Hands Free Door Access Control/ Elevator Access Solution

Description

1.Technology Parameter

Power Supply:	DC12V/3A
Work Current:	≦100MA
Baud Rate:	9600.n.8.1
Work Frequency:	2.45G&125K&13.56MHZ
Operating Temp:	-40 degrees to 85 degree
Relative Humidity:	≦90%
Anti-collision Capacity:	100pcs card with 3s
Reading range(2.45G):	1-2.6M distance can be adjusted
Reading range(13.56mhz)	2cm
Weight:	560g
Size:	121*84*22cm
IP CODE	IP54

2.Main Function Introduction:

• Reading Range can be adjustable

Adjusting the reading range by software or hardware, two operation way can be selection, which makes the application and setting very easy and convenient.

• High Security of resisting disturbance

Adopts frequency hopping&multi-type address technology, strong encryption to the card info by the unique program encryption technology, data transmitting to the reader after multi-type checking way for data processing.

• Strong Anti-Collision Capacity

100PCS card ID can be read simultaneously wihin3s.This function most suit for hands-free lift/elevator control system.

• Reading distance can be controlled exactly

The reader is waked up by 125K low-frequency activator, Wiegand and which can control the reading range effectively. And the reading distance can be setting from 1-2.6m, max distance is 2.6m.

• Multi-type Data output formatWiegand

With 26 /Wiegand 34 data format for selection, and which can easy to integrate into any access control system.

• Main Application

Hands free door access control system, Hands free lift control sy stem;Rfid hands free parking management system, product/personnel tracking system, visitor management system, etc.

 

3.Main Advantage of JUTAI AE-26 Hand Free Door Access Control Solution

• Dual Core CPU Design(ARM7)
• ARM Cortex-M3 micro controller
• Anti-collision capacity:100pcs
• Work frequency:2.45GHz&125K
• Antenna polarization :direction
• Microwave COM c heck: CRC16cyclic redundancy check
• Receiving sensitivity:-90dBm
• Low power remind: relay output(consult)
• Ultra-low power consumption and two pcs CR2032 button battery with 4 years using life at least.

 

Work with JTID-52/65 Smart Tag

1.Work frequency:2.4GHz~2.483GHz&125K&13.56MHz
2.Work life:>6 years (battery not be replaced )
4.Microwave COM check: CRC2032cyclic redundancy check
5.Receiving sensitivity :-80 dbm ～ -90 dbm
6.Work current:<4UA
7.Alarm under low power
8.Key function :help function match reader help/open/close
9.Power failure save :>10 years

Model: JTID-52/62
Main Connection